Description
Description
Picote Liner Glider – Manual Wet-Out Roller (#2380000000)
Manual roller for wetting-out 2-4″ liners. Comes equipped with easy to charge color coded and size stamped gap setting rings for almost any liner thickness you may need.
Gap setting rings allow for almost any liner thickness you may need. The rings are stored onboard, so they are always there when needed.
Picote Liner Glider Product Fact Sheet
Uses and benefits
- Extremely lightweight, compact & portable.
- Virtually maintenance free – no motors or electrical parts to wear out.
- Color coded and stamped rings make proper gap selection easy.
- Gap Rings are stored onboard so they are always there where you need them.
- To use, place the liner on a flat, protected surface. Roll the Liner Glider back and forth over the resin slug while pushing the resin through the entire length of the liner until it is fully saturated.
Technical specs
| Liner Size | DN50-100 (2-4″) |
| Weight | 4kg (8.8 lbs) |
| Dimensions | 336 x 333 x 263mm |
| 13.2 x 13.1 x 10.4″ | |
| Picote Liner Glider Gap Ring Guide | |
| Ring Color | Ring Gap (mm) for Liner Thickness (mm) |
| Black | 6mm gap for 3mm liner |
| Blue | 7mm gap for 3.5mm liner |
| Red | 8.5mm gap for 4.25mm liner |
| Green | 10mm gap for 5mm liner |
| White | 12mm gap for 6mm liner |
Picote Liner Glider – Manual Wet-Out Roller (#2380000000)
Description
Description
Picote Liner Glider – Manual Wet-Out Roller (#2380000000)
Manual roller for wetting-out 2-4″ liners. Comes equipped with easy to charge color coded and size stamped gap setting rings for almost any liner thickness you may need.
Gap setting rings allow for almost any liner thickness you may need. The rings are stored onboard, so they are always there when needed.
Picote Liner Glider Product Fact Sheet
Uses and benefits
- Extremely lightweight, compact & portable.
- Virtually maintenance free – no motors or electrical parts to wear out.
- Color coded and stamped rings make proper gap selection easy.
- Gap Rings are stored onboard so they are always there where you need them.
- To use, place the liner on a flat, protected surface. Roll the Liner Glider back and forth over the resin slug while pushing the resin through the entire length of the liner until it is fully saturated.
Technical specs
| Liner Size | DN50-100 (2-4″) |
| Weight | 4kg (8.8 lbs) |
| Dimensions | 336 x 333 x 263mm |
| 13.2 x 13.1 x 10.4″ | |
| Picote Liner Glider Gap Ring Guide | |
| Ring Color | Ring Gap (mm) for Liner Thickness (mm) |
| Black | 6mm gap for 3mm liner |
| Blue | 7mm gap for 3.5mm liner |
| Red | 8.5mm gap for 4.25mm liner |
| Green | 10mm gap for 5mm liner |
| White | 12mm gap for 6mm liner |
$149.60
$7,200.00 – $9,970.00
$123.00 – $322.50
